Setting The Time On Your Crux Artisan Coffee Maker

Quick answer

• Your Crux Artisan coffee maker has a clock for programming brews.
• Most models use a “Set Time” or “Clock” button.
• You’ll likely need to press and hold this button.
• Then, use the “Hour” and “Minute” buttons to adjust.
• Confirm by pressing “Set Time” or “Program” again.
• Check your specific model’s manual if it’s not obvious.

Who this is for

• Anyone with a Crux Artisan coffee maker who wants to use the auto-brew feature.
• Campers who like waking up to fresh coffee without fiddling in the dark.
• Busy folks who want their coffee ready when they are.

What to check first

Brewer type and filter type

You’ve got a Crux Artisan, so it’s likely a drip coffee maker. They usually use standard cone or basket filters. Make sure you have the right size and type. A misaligned filter is a common cause of weak coffee or spills.

Make sure you have the right size and type of coffee maker filters. Using the correct ones ensures a clean brew and prevents spills.

Premium 6-pack Water Filters For Replacement Breville BWF100 with Ion Exchange Resin inside

• PACKAGE INCLUDES: 6 counts of Resin Media Water Filters fit Breville Coffee Machines.
• COMPATIBLE WITH BREVILLE: BES920XL, BES980XL, BES900XL, BES860XL, BES870XL Barista Espresso & BES840XL Infuser Espresso Machine and BKC600XL & BKC700XL Gourmet Single Cup Brewer.
• SUPERIOR QUALITY: All water filters are made out of resin in order to protect your Breville coffee machine from the damages posed by hard water buildup also eliminate the smell and taste of chlorine, sulfur and iron as well as some minerals, soften the hard water with a progress called ion exchange.
• EASY AND SAFE: These Breville Espresso replacement filters are incredibly easy to use as they are designed to simplify the filter exchange process. Each water filter is individually sealed with sufficient amount of resin beads in order to ensure the highest level of satisfaction.
• FOR THE BEST TASTING BEVERAGES: Exchange the replacement water filters every couple of months or every 60 water tank refills, replace them more often, if you have hard water in your area.

Buy on Amazon

Water quality and temperature

Use fresh, cold, filtered water. Tap water can have minerals that mess with flavor and build up in your machine. Too hot or too cold water won’t extract the coffee right. Stick to what the manual recommends for optimal brewing temperature.

Grind size and coffee freshness

Freshly ground beans are king. For drip makers, a medium grind usually works best. Too fine, and you get bitter sludge. Too coarse, and it’s weak and watery. Always grind right before you brew for that best aroma.

Coffee-to-water ratio

This is huge for flavor. A good starting point is about 1:15 to 1:17. That means 1 gram of coffee for every 15-17 grams of water. In US terms, that’s roughly 1-2 tablespoons of coffee per 6 oz of water. Adjust to your taste.

Cleanliness/descale status

A clean machine makes good coffee. If you haven’t descaled in a while, mineral buildup can affect taste and performance. Run a descaling cycle according to your manual. It’s like giving your coffee maker a spa day.

Step-by-step (brew workflow)

1. Plug in the coffee maker.

• What “good” looks like: The display lights up, showing the current time or a default setting.
• Common mistake: Forgetting to plug it in. Avoid this by always checking the cord first.

2. Press and hold the “Set Time” or “Clock” button.

• What “good” looks like: The time display starts flashing, usually the hour digits.
• Common mistake: Just pressing the button briefly. You need to hold it down to enter setting mode.

3. Press the “Hour” button to set the correct hour.

• What “good” looks like: The hour digits change as you press the button. Make sure to note AM/PM if your display shows it.
• Common mistake: Setting the wrong AM/PM. Double-check this before moving on.

4. Press the “Minute” button to set the correct minutes.

• What “good” looks like: The minute digits advance.
• Common mistake: Rushing and setting the wrong minute. Take your time here.

5. Press the “Set Time” or “Clock” button again to confirm.

• What “good” looks like: The time stops flashing and displays the new, correct time.
• Common mistake: Not confirming. The time might revert if you don’t lock it in.

6. (Optional) Set the brew time using the “Program” button.

• What “good” looks like: The display shows the programmed brew time.
• Common mistake: Confusing “Set Time” with “Program.” They are separate functions.

7. Add fresh water to the reservoir.

• What “good” looks like: The water level is between the min/max lines.
• Common mistake: Overfilling or underfilling. This can lead to overflow or weak coffee.

8. Place a filter in the brew basket.

• What “good” looks like: The filter sits snugly in the basket, properly seated.
• Common mistake: Using the wrong size filter or having it creased. This can cause grounds to escape.

9. Add your desired amount of freshly ground coffee to the filter.

• What “good” looks like: The grounds are evenly distributed in the filter.
• Common mistake: Using stale coffee or the wrong grind size. This is the foundation of your brew.

10. Place the brew basket back into the machine and put the carafe on the warming plate.

• What “good” looks like: Everything is seated correctly and securely.
• Common mistake: Forgetting the carafe. You’ll have a mess, guaranteed.

11. Press the “Brew” or “Start” button.

• What “good” looks like: The machine starts heating and dripping.
• Common mistake: Not starting the brew cycle after setting the program. It won’t brew automatically if you don’t hit start for the immediate brew.

Common mistakes (and what happens if you ignore them)

Decision rules (simple if/then)

• If the display is blank, then check if the coffee maker is plugged in because it needs power to operate.
• If the time is flashing, then you are in time-setting mode and can proceed to adjust the hour and minute.
• If the hour is incorrect, then press the “Hour” button repeatedly until the correct hour (and AM/PM) is displayed.
• If the minutes are incorrect, then press the “Minute” button repeatedly until the correct minutes are displayed.
• If the time is still not correct after adjusting, then try unplugging the machine for 30 seconds and starting over because a reset can clear minor glitches.
• If you want to program a future brew time, then use the “Program” button after setting the current time because it’s a separate function.
• If the coffee tastes bitter, then check your grind size and coffee-to-water ratio because these are the most common culprits.
• If the coffee maker is brewing slowly, then it’s likely time to descale because mineral buildup restricts water flow.
• If you are unsure about a specific button or feature, then consult your Crux Artisan coffee maker’s manual because it has model-specific instructions.

FAQ

How do I know if I’m in time-setting mode?

The time display on your Crux Artisan coffee maker will usually start flashing when you’re in time-setting mode. This indicates it’s ready for you to adjust the hours and minutes.

Can I set the time while the machine is brewing?

Generally, no. You need to be in standby mode to set the clock or program a future brew. Try to set the time before you start your first brew of the day.

What if my Crux Artisan doesn’t have a “Set Time” button?

Some simpler models might not have a clock function. If you can’t find a “Set Time,” “Clock,” or similar button, your model likely doesn’t support setting the time. Check your user manual to be sure.

How do I set the 12-hour vs. 24-hour format?

This varies by model. Some have a dedicated button, while others toggle between formats when you press and hold a specific button combination. Your manual is the best place to find this detail.

My programmed brew didn’t start. What’s wrong?

First, ensure the clock was set correctly. Then, confirm you pressed the “Program” button and set the desired brew time. Finally, make sure you hit “Start” for the programming to activate.

How often should I set the time?

You only need to set the time if the power goes out or if you unplug the machine for an extended period. Otherwise, the clock should maintain its setting.

What does the “Program” button do?

The “Program” button allows you to set a specific time for your coffee maker to start brewing automatically. It’s super handy for waking up to coffee.

Is it important to set the time accurately?

Yes, especially if you plan to use the auto-brew feature. An inaccurately set clock means your coffee won’t be ready when you expect it.

What this page does NOT cover (and where to go next)

• Detailed troubleshooting for electrical issues beyond basic power checks. (Refer to professional repair services or the manufacturer’s support.)
• Specific cleaning product recommendations or advanced descaling techniques. (Consult your manual or manufacturer support for approved solutions.)
• Comparisons of different Crux coffee maker models or features. (Visit the official Crux website or product reviews.)
• Advanced brewing techniques like pour-over or espresso. (Explore specialized coffee brewing guides and resources.)