Cleaning a Jura coffee machine at home is simple when you follow the right guide and instructions. You can keep your coffee tasting fresh and your machine working well with a few easy steps. Regular cleaning helps you avoid stale flavors, keeps germs away, and extends the life of your Jura machine. If you use milk-based drinks, rinse the milk system daily and use Jura cleaning tablets for best results. Here’s a quick look at how often you should clean:
Recommended Tasks | |
|---|---|
Daily | Rinse the milk system after each use. |
Weekly | Clean the grounds container, drip tray, and water tank. |
Monthly | Run the milk system cleaning cycle and descale the machine. |
As Notified | Follow machine prompts for cleaning or descaling. |
This guide gives you step-by-step instructions and helps you feel confident about cleaning Jura machines.
Key Takeaways
Clean your Jura coffee machine often. This keeps your coffee fresh. It also helps the machine work well. Use only Jura-approved cleaning tablets, milk cleaners, and descalers. These protect your machine. Rinse the milk system every day. Run a full milk cleaning cycle to stop clogs and bad smells. Descale your machine every 1 to 3 months. This removes mineral buildup. It also keeps brewing fast. Clean removable parts like the drip tray, grounds container, and water tank each week. Use mild soap for this. Use soft brushes and microfiber cloths for hard-to-reach spots. This will not damage any parts. Follow your machine’s cleaning prompts. Never stop cleaning or descaling cycles early. Check and change the water filter every month. This lowers limescale and makes coffee taste better.
Tools and Products
Cleaning Tablets
When you clean your Jura coffee machine, you want to use the right cleaning tablets. These tablets are made just for Jura machines. They help remove coffee oils and fats from the brewing unit. You only need to drop a tablet into the machine and start the cleaning program. The process is simple and keeps your coffee tasting fresh.
Jura 3-phase cleaning tablets work best. They are phosphate-free and food-safe.
These tablets break down coffee residue and protect your machine.
The cleaning cycle is automatic. You just follow the prompts on your machine.
Tip: Using non-Jura cleaning tablets or harsh chemicals can hurt your machine and change the taste of your coffee. Stick with the original tablets for the best results.
If you want an alternative, you can try Rinza tablets, but always check if they are safe for your model. Remember, tablet cleaning is quick and easy when you use the right product.
Milk Cleaner
If you love milk-based drinks, you need to keep the milk system clean. Milk can leave behind fats and proteins that build up over time. Jura milk system cleaner, often called mini tabs, is designed for this job. It keeps the milk pipes clean and helps you get smooth, fine milk foam every time.
Use Jura milk system cleaner mini tabs for best results.
These tabs are phosphate-free and safe for food contact.
The cleaner removes milk residue and keeps the system hygienic.
You just add the mini tabs to water and run the milk cleaning program. This step is important if you use your machine for lattes or cappuccinos. Clean the milk system daily to avoid clogs and bad smells.
Note: Skipping milk system cleaning can cause froth problems and even damage the machine. Make it part of your daily routine.
Descaler
Water can leave limescale inside your coffee machine. Over time, this buildup can slow down brewing and affect the taste. Jura descaling tablets are made to remove these mineral deposits safely.
Always use Jura descaling tablets or solutions. They are made for Jura machines and protect the internal parts.
Remove any water filters before you start descaling. The descaling solution can damage the filter.
Follow the machine’s prompts for descaling. The process is automatic and easy.
If you use the CLEARYL filter system, you may not need to descale as often. The filter helps prevent limescale from building up in the first place.
Reminder: Never skip descaling. If you do, your machine might clog or brew more slowly. Always follow the cleaning schedule and use Jura-specific products.
Brushes and Cloths
You might think cleaning your Jura coffee machine is all about fancy tablets and special solutions. But don’t forget the basics—brushes and cloths. These simple tools help you reach spots that the automatic cleaning programs can’t touch.
Why do you need brushes and cloths?
Coffee grounds, dust, and milk residue can hide in small corners and removable parts. If you leave these areas dirty, your machine won’t work as well. You might even notice a change in taste.
Here’s how you can use brushes and cloths to keep your Jura sparkling:
Soft-Bristled Brush:
Use a small, soft-bristled brush to clean the grinder and the chute where you add ground coffee. A brush helps you sweep away stuck coffee grounds without scratching the surface.Tip: Never use a wet brush on the grinder. Moisture can damage the burrs and electrical parts.
Microfiber Cloth:
Wipe down the exterior of your machine with a damp microfiber cloth. This keeps fingerprints, coffee splashes, and dust away. Microfiber works well because it grabs dirt without leaving lint behind.Cleaning the Drip Tray and Grounds Container:
Remove these parts and wash them with warm water and a cloth. Scrub gently to avoid scratches. Dry everything before putting it back.Water Tank Care:
Use a clean cloth to wipe inside the water tank. If you see any buildup, a brush can help loosen it.
Here’s a quick table to help you pick the right tool for each part:
Part | Tool | How Often |
|---|---|---|
Grinder | Soft brush | Weekly |
Exterior | Microfiber cloth | Weekly |
Drip tray/container | Cloth/brush | Weekly |
Water tank | Cloth/brush | Weekly |
Note: Always use gentle motions. You don’t want to scratch or damage any part of your Jura.
What to Avoid
You want your Jura machine to last for years. Using the wrong cleaning products or tools can cause problems. Some cleaners might seem safe, but they can harm your machine or change the taste of your coffee.
Here’s what you should avoid:
Harsh Chemicals:
Stay away from bleach, ammonia, or strong detergents. These can damage the internal parts and leave behind harmful residues.Abrasive Sponges or Brushes:
Never use steel wool or rough scrubbers. They scratch the surfaces and ruin the finish.Non-Jura Cleaning Tablets:
Some tablets might look similar, but they can contain ingredients that aren’t safe for your machine. Always check the label and stick with Jura-approved products.Vinegar for Descaling:
You might hear that vinegar works for descaling. Jura does not recommend it. Vinegar can damage seals and leave a strong smell.Soaking Electrical Parts:
Never soak the grinder, display, or any part with wires in water. Wipe these areas gently with a dry cloth.
Alert: If you use the wrong product, you might void your warranty. Always follow the manufacturer’s instructions.
If you’re ever unsure, check your Jura manual or ask Jura support. Keeping your cleaning routine simple and safe helps your machine stay in top shape. Stick with approved products and gentle tools, and you’ll enjoy great coffee every day.
Cleaning Frequency
Monthly Cleaning
You want your Jura coffee machine to last a long time. Regular cleaning is very important. Most machines remind you to clean after 180 coffees or 80 rinses. But you should not wait longer than a month. Cleaning every month keeps your machine working well and your coffee tasting good.
Here are the steps for monthly cleaning:
Run a cleaning cycle with Jura cleaning tablets. This step removes coffee oils and residue from the brew group.
Descale the machine with Jura descaling tablets or solution. This removes minerals that can clog your machine.
Take out the brew group and rinse it under warm water.
Wipe the outside and clean the drip tray, grounds container, and water tank.
Put food-safe grease on the brew group to help it move smoothly.
Tip: Set a reminder on your phone or calendar. This helps you remember to clean your machine every month.
Cleaning your machine often helps it last 10–15 years. You will avoid clogs, breakdowns, and bad-tasting coffee.
Cleaning Task | How Often | Why It Matters |
|---|---|---|
Cleaning cycle | Monthly | Removes coffee oils and residue |
Descaling | Monthly | Prevents mineral buildup and clogs |
Brew group cleaning | Monthly | Keeps coffee tasting fresh and machine running well |
Lubrication | Monthly | Ensures smooth operation |
Usage Prompts
Your Jura machine makes cleaning simple by showing prompts. When you see “Clean Machine” or “Descale Now,” you should clean right away. If you ignore these prompts, your machine could have problems later.
Always follow the on-screen steps for cleaning or descaling.
The machine will show you what to do next.
If you have not used your machine for a while, run a rinse cycle before making coffee.
Note: The prompts help protect your machine and your coffee. Trust the messages you see!
Filter Maintenance
The water filter in your Jura machine does more than clean water. It also protects your machine from limescale and keeps your coffee tasting good. Change the filter every month or after about 50 liters of water.
The CLEARYL Smart+ filter uses special technology to remove chlorine, heavy metals, and limescale.
The filter keeps good minerals in the water. This helps your coffee taste better.
Your machine uses RFID technology to track the filter and remind you when to change it.
Even if you use bottled water, always use the filter to stop mineral buildup.
If you skip changing the filter, you will need to descale more often. This could hurt your machine.
Pro Tip: Clean the water tank and brewing unit often. This helps the filter work well and keeps your coffee tasting great.
If you follow these easy steps, your Jura machine will stay in good shape. You will enjoy tasty coffee every day.
Preparation
Before you start cleaning your Jura coffee machine, you need to get everything ready. Good preparation helps you clean safely and makes the whole process much easier. Let’s walk through the steps you should follow before you begin.
Power Off
First, always turn off your Jura machine. Unplug it from the wall. This keeps you safe from electric shocks and protects the machine’s electronics. Never try to clean the machine while it’s still on or plugged in. You don’t want water or cleaning solution to get into the electrical parts. If you just made coffee, let the machine cool down for a few minutes. Hot parts can burn your hands.
Tip: Make it a habit to unplug your machine before any cleaning, even if you’re just wiping the outside.
Remove Parts
Next, take out all the removable parts. This includes the drip tray, grounds container, water tank, and milk system parts. Removing these pieces lets you clean every corner and stops old coffee or milk from building up.
Here’s a quick checklist to help you:
Take out the drip tray and empty any water.
Remove the coffee grounds container and throw away used grounds.
Pull out the water tank. Pour out any old water.
Detach the milk system parts if your model has them.
Wash these parts with warm water and a little mild soap. Use a soft brush for tight spots. Rinse everything well and dry with a clean cloth. If you use a water filter, clean the water tank each time you change the filter. Dissolve a descaling tablet in water, rinse the tank, and make sure it’s ready for fresh water.
Note: Never soak electrical parts or the grinder in water. Only clean these with a dry or slightly damp cloth.
Access Menu
Now, you need to get your Jura machine ready for its cleaning program. Plug the machine back in and turn it on. Most Jura machines have a menu button or a touch screen. Use this to find the cleaning or maintenance section.
Open the menu and look for “Clean,” “Descale,” or “Milk System Clean.”
If you use a water filter, set the machine to filter mode. This tells the machine to follow the right cleaning steps.
Fill the water tank with fresh, cold water. The machine needs enough water to run the cleaning cycle.
Get your Jura cleaning tablet ready. The machine will prompt you when to add it.
For milk system cleaning, use Jura milk system cleaner and follow the on-screen instructions.
Pro Tip: Always use original Jura cleaning tablets and milk system cleaner. These products protect your machine and keep your coffee tasting great.
When you follow these steps, you set yourself up for a smooth and safe cleaning process. You’ll keep your Jura machine in top shape and enjoy delicious coffee every day.
Cleaning Jura Machine
Keeping your Jura coffee maker in top shape means knowing how to clean it the right way. You have two main tasks: running the automatic cleaning program and washing removable parts by hand. Let’s break down each step so you can keep your machine running smoothly and your coffee tasting great.
Automatic Program
The automatic cleaning program does most of the hard work for you. Your Jura machine will remind you when it’s time to clean. You just need to follow the instructions on the display. Here’s how you do it:
Insert Tablet
First, make sure you empty the drip tray and the coffee grounds container. The machine will not start the cleaning program until you do this.
Place a container under the coffee spout. This will catch the water and cleaning solution that comes out during the cleaning process.
When the display tells you, open the bypass doser or filler funnel. Drop in one Jura cleaning tablet. These tablets break down coffee oils and residue inside the machine.
Close the bypass doser.
Tip: Always use Jura cleaning tablets. They dissolve coffee oils and residues that can spoil the taste of your coffee.
Follow Prompts
Press the “clean” button or select the cleaning option from the menu.
The machine will start rinsing with water. You will see water flow out in short bursts.
The cleaning program will pause and prompt you to empty the drip tray and grounds container again. Do this and put them back.
The machine will continue the cleaning process, flushing out the dissolved oils and residue.
When the program finishes, the display will return to the normal screen. Your Jura is now clean and ready to use.
Note: The whole cleaning process takes about 15 minutes. You don’t need to watch the machine the whole time, but check back when it asks you to empty the grounds container or drip tray.
Manual Parts Cleaning
Some parts of your Jura need a little extra attention. You should clean these by hand with warm water and mild detergent. This helps prevent buildup and keeps your coffee tasting fresh.
Drip Tray
Remove the drip tray from the machine.
Wash it with warm water and a small amount of mild soap.
Rinse well and dry with a clean cloth.
Put the drip tray back in place.
Grounds Container
Take out the coffee grounds container.
Throw away the used coffee grounds.
Wash the container with warm, soapy water.
Rinse and dry it before putting it back.
Pro Tip: Always empty grounds container before it gets too full. This keeps your machine running smoothly.
Water Tank
Remove the water tank from your Jura.
Wash it with warm water and a soft cloth.
If you see any buildup, use a gentle brush to scrub it away.
Rinse the tank well to remove any soap.
Dry the tank and fill it with fresh, cold water before putting it back.
Alert: Never use harsh chemicals or abrasive sponges on any part of your Jura. Stick to mild soap and soft brushes.
Grinder Care
The grinder is a key part of your Jura coffee machine. It needs regular care to keep working well. Coffee grounds can get stuck in the grinder and affect the taste of your coffee.
Use a soft, dry brush to sweep away any coffee grounds from the grinder and the chute.
Never use water or wet brushes on the grinder. Moisture can damage the burrs and electrical parts.
Wipe the outside of the grinder area with a dry or slightly damp cloth.
Tip: Clean the grinder once a week. This helps prevent clogs and keeps your coffee tasting fresh.
A clean grinder means better-tasting coffee and a longer-lasting machine. Make grinder care part of your regular cleaning jura machine routine.
By following these steps, you make sure your cleaning jura machine routine covers every part of your coffee maker. The automatic cleaning program removes hidden oils and residue. Manual cleaning keeps the removable parts fresh and safe. Grinder care stops clogs before they start. When you stick to these instructions, you get the best flavor and the longest life from your Jura.
Milk System
Keeping the milk system clean in your Jura coffee machine is key if you want smooth, tasty drinks every day. Milk can leave behind residue that causes clogs and bad smells. If you follow these steps, you will keep your machine working well and your drinks safe to enjoy.
Daily Rinse
You should rinse the milk system every day, especially after making milk drinks. Most new Jura machines do this automatically about eight minutes after you finish making a milk drink. If your machine does not rinse by itself, you can start the rinse from the menu.
Here’s what you need to do each day:
After making a milk drink, start the milk system rinse. This flushes out milk and stops it from drying inside the pipes.
At the end of the day, run the automated milk system cleaning program. Use one Jura milk system cleaning mini tablet for this step.
Let the machine guide you through the cleaning process. It will tell you when to add the cleaning solution and when to rinse.
Check the silicone milk tube. The machine cleans it during the cycle, but you should look for cracks or buildup. Replace the tube every three months for best results.
Tip: Daily cleaning keeps milk from turning sour and stops bacteria from growing in your machine.
Deep Clean
Sometimes, you need to give the milk system a deeper clean. This helps remove any stubborn residue and keeps the frother working well. You should do a deep clean if you notice less foam or if you use your machine a lot.
Follow these steps for a deep clean:
Gather your supplies: mild dish soap, warm water, a soft sponge or cloth, a toothbrush, and a clean towel.
Take apart the milk frother, tubes, and nozzles.
Soak all parts in warm, soapy water. This helps dissolve milk proteins and fats.
Use the toothbrush or sponge to gently scrub away any milk residue or coffee residue.
Rinse everything under warm water to remove soap.
Dry all parts with a clean towel and put them back together.
Note: Deep cleaning stops clogs and keeps your milk frother safe and hygienic.
Prevent Clogs
You can prevent clogs by cleaning the milk system often and checking for buildup. Milk solids can block the pipes and nozzles if you skip cleaning. This can cause weak foam or even stop the milk system from working.
Here are some ways to prevent clogs:
Always rinse and clean the milk system after each use.
Wipe the steam wand with a damp towel after making milk foam.
Run steam through the wand into the drip tray to clear out any milk left inside.
If you see less steam or foam, remove the wand tip and check for dried milk. Use a needle to clear any blockages.
Rinse the wand tip and run hot water through the wand arm to make sure no coffee residues or milk are left behind.
Alert: If you let milk dry inside the system, it can cause hard-to-remove clogs and affect the taste of your drinks.
By following these steps, you keep your Jura milk system clean, safe, and ready for your next cup.
Descaling
Descaling is just as important as cleaning your Jura coffee machine. If you skip descaling, minerals from water can build up inside. This buildup can slow brewing and change how your coffee tastes. It can even hurt your machine. Let’s talk about when to descale, how to do it, and what mistakes to avoid.
When to Descale
You might wonder how often to descale your Jura. It depends on how much you use it and how hard your water is. Here’s a simple guide:
Most Jura machines need descaling every 2 or 3 months.
If you use your machine a lot, descale more often.
Hard water means you need to descale more, too.
Your Jura has sensors that check water hardness and use. It will tell you when to descale.
If you use a CLARIS Pro Smart+ or Pro Smart maxi filter, you may not need to descale as much.
Tip: Descaling often keeps your machine working well and your coffee tasting great.
Descaling Steps
When your Jura says it’s time, don’t wait. Follow these steps to descale safely:
Take out the water filter if you use one. The descaling solution can ruin it.
Fill the water tank with fresh water. Add the right amount of Jura descaling solution. You can use citric acid, but don’t use vinegar because it smells strong.
Put a big container under the coffee spout to catch the liquid.
Start the automatic descaling program from the menu.
Let the program run. The machine will pump the solution through all the pipes.
When the machine asks, empty the drip tray and fill the tank with clean water.
The machine will rinse itself to get rid of any leftover solution.
Here’s a table to help you compare different descaling agents:
Descaling Agent | Acid Strength (pKa1) | Effectiveness and Notes |
|---|---|---|
Sulfamic Acid | 1.0 | Very strong for heavy scale; use carefully. |
Phosphoric Acid | 2.1 | Strong; good for heavy scale; can change color if used too much. |
Citric Acid | 3.1 | Safe for food, cheap, and good for regular use. |
Lactic Acid | 3.8 | Milder, found in some store products. |
Acetic Acid (Vinegar) | 4.7 | Works, but not suggested—smell stays and can change taste. |
Note: Always rinse your machine a few times after descaling. This removes any leftover solution or smell.
Avoiding Damage
You want your Jura to last a long time. Stopping the descaling cycle early can cause problems. If you stop too soon, residue can stay inside the pipes. This can hurt your machine and change your coffee’s taste.
Never turn off or unplug your Jura during descaling.
Wait until the descaling program is done before using your machine again.
Always use the right descaling solution. Don’t use strong acids like hydrochloric acid, which can damage metal parts.
⚠️ If you have questions, check your Jura manual or ask Jura support. Being careful during descaling keeps your machine working well and your coffee tasting good.
Model-Specific Tips
Every Jura coffee machine has its own cleaning quirks. You want to get the best results, so let’s look at what makes the E8, S8, and D6 models special. You’ll find that following the right steps for your model keeps your coffee tasting great and your machine running smoothly.
Clean a Jura E8
If you own a Jura E8, you’ll notice the cleaning process feels a bit different from other models. The E8 guides you through each step with clear prompts. Here’s how you clean a Jura E8:
Wait until you’ve made about 180 coffees or done 80 rinses. The machine will remind you when it’s time.
Press the “P” button to start the cleaning program.
Empty the grounds container and the water tank before you begin.
When the display tells you, open the funnel cover at the back of the machine. Drop in a Jura cleaning tablet.
Follow the prompts on the screen. The E8 will walk you through each step, including when to add the tablet and when to empty containers.
Let the cleaning cycle run without stopping it. Interrupting the process can cause problems.
The machine will flush water through the coffee spout several times. This cleans out oils and residue.
Tip: The E8’s cleaning cycle is mostly automatic. You just need to follow the instructions and avoid stopping the program.
S8 and D6 Steps
The S8 and D6 models have their own cleaning routines. You’ll see some differences in how you start the cleaning cycle and where you put the cleaning tablet.
On the S8, use the touchscreen to find the cleaning program. The machine will show you each step.
For the D6, press the rotary switch to access the cleaning menu.
Both models ask you to empty the drip tray and grounds container first.
Place the cleaning tablet in the designated spot. The S8 usually has a front funnel, while the D6 may use a side or top funnel.
Follow the on-screen or display prompts. The machine will rinse and clean itself.
Don’t interrupt the cleaning cycle. Wait until the program finishes before using your machine again.
Note: Always check your user manual for the exact location of the tablet slot. Each model is a little different.
Access Panels
Sometimes, you need to clean inside your Jura machine. Some models have access panels that let you reach the brew group or other parts.
The E8 and S8 have panels you can open to reach the brew group for a quick rinse.
Use a soft brush or a food-safe grease if the manual suggests it.
The D6 may need a special tool to open the panel. You can find this in the accessory kit or order it from Jura.
Never force a panel open. If you’re not sure, check the manual or ask Jura support.
Model | Cleaning Tablet Location | Cleaning Program Access | Special Tools Needed |
|---|---|---|---|
E8 | Funnel at back | “P” button | No |
S8 | Front funnel | Touchscreen | No |
D6 | Side/top funnel | Rotary switch | Sometimes |
🛠️ If you need to clean inside, use only Jura-approved brushes and tools. This keeps your machine safe.
You’ll find that knowing your model’s cleaning steps makes the whole process easier. Your coffee will taste better, and your Jura will last longer.
Troubleshooting
Cleaning your Jura coffee machine usually goes smoothly, but sometimes things don’t work as planned. Don’t worry! You can fix most issues at home with a few simple steps. Let’s look at some common problems and how you can solve them.
Interrupted Cycle
If your cleaning or descaling cycle stops before it finishes, your machine might not be clean. Here’s what you can do:
Check if the cleaning tablet dissolved. If you find an undissolved tablet in the grounds container, remove it.
Rinse the brewing unit and water lines with fresh water. This helps clear any blockages.
Turn off your Jura, wait about 10 seconds, then turn it back on. Try starting the cleaning cycle again from the menu.
Make sure you use only Jura-approved cleaning tablets. Other brands might not dissolve properly.
Double-check the water tank. Fill it with fresh water and make sure it’s seated correctly.
Tip: If the cycle keeps stopping, your machine may need a deeper clean or a service check. Contact Jura support if you can’t fix it at home.
Error Messages
Jura machines show error messages when something goes wrong during cleaning. These messages don’t always mean a part is broken. Sometimes, the machine just needs a little help.
Here’s how you can handle common error messages:
If you see a “Fill Water Tank” message, check for leaks or sediment in the tank. Inspect the O-ring, inlet valve gasket, and magnetic float. Replace them if needed.
If the cleaning tablet isn’t detected, clean the bypass compartment and sensor area with a soft cloth. Place the tablet flat in the compartment.
For a cleaning cycle error, rinse the brewing unit and try again. Make sure the water hardness setting matches your local water.
If the milk frother isn’t working, dismantle the spout and rinse all parts. Replace hoses or valves if you still have problems.
For persistent errors, restart the machine or contact Jura service.
Note: Error codes often point to a process that didn’t finish, not a broken part. Take time to check each step before replacing anything.
Maintenance Tips
You can prevent most cleaning problems by following a good maintenance routine. Here are some easy tips:
Clean the bypass compartment and tablet sensor area with a soft cloth.
Always place cleaning tablets correctly in the bypass compartment.
Power cycle your machine if it doesn’t recognize a cleaning tablet.
Descale your Jura regularly and remove the filter before starting.
Update your machine’s firmware if an update is available.
Clean the milk frother with fresh water after every use. Draw off steam until only clean water comes out.
Deep clean the machine and frother as your manual suggests.
Use the maintenance menu to start cleaning and descaling cycles.
If you still have trouble, recalibrate the sensors or call a professional.
😊 Regular care keeps your Jura running smoothly and your coffee tasting great!
You want your coffee to taste good each time. Clean your Jura machine often to keep it working well. Here are some things to remember:
Use Jura cleaning tablets and water filters.
Wash the drip tray, dreg drawer, and milk system a lot.
Cleaning Task | Why It Matters |
|---|---|
Keeps taste fresh, stops residue | |
Milk system cleaning | Makes froth smooth, stops clogs |
Descaling | Stops limescale, helps machine work |
Grinder care | Keeps flavor strong, grinder works |
Look at your manual or ask Jura support if you need help. Follow these steps and you will have tasty coffee every day!
FAQ
How often should you clean your Jura coffee machine?
You should clean your Jura coffee machine once a month. If you drink a lot of coffee, clean it more often. Always follow the prompts on your machine for best results.
Can you use regular dish soap to clean Jura parts?
You can use mild dish soap for removable parts like the drip tray and water tank. Avoid strong cleaners or bleach. Rinse everything well before putting it back.
What should you do if your Jura shows a cleaning error?
Check if you placed the cleaning tablet correctly. Make sure the water tank is full and seated. Restart your machine and try again. If the error stays, contact Jura support.
How do you clean the milk system every day?
Run the milk system rinse after making milk drinks. Use a Jura milk system cleaning tablet at the end of the day. Take apart the milk tube and wash it with warm water.
Is it safe to use vinegar for descaling?
No, you should not use vinegar. Vinegar can damage seals and leave a strong smell. Always use Jura descaling tablets or solution for safe cleaning.
What happens if you skip cleaning cycles?
Skipping cleaning cycles can cause clogs, bad-tasting coffee, and machine problems. Your Jura may not work as well. Clean regularly to keep your coffee fresh and your machine healthy.
How do you know when to change the water filter?
Your Jura machine will remind you when it is time to change the water filter. Replace it every month or after about 50 liters of water for best results.